|
barrels
Oct 24, 2009 16:17:33 GMT -5
Post by Tommy on Oct 24, 2009 16:17:33 GMT -5
should i get a invert nightstick barrel for my g3 or a differnt one?
|
|
|
barrels
Oct 25, 2009 17:43:35 GMT -5
Post by mushroom on Oct 25, 2009 17:43:35 GMT -5
After all of the barrels I have used over the years, the only one (single barrel, not a kit) that I have found that works well time and again with no issues is a Dye Ultralight barrel.
Carbon Fiber barrels scratch too easily for the cost. Brass barrels dent and become warped with temp variations.
Be careful of barrel kits with aluminum inserts as well. If you dent/bend/warp one just a little, that insert could damage the insert sleeve. (i.e. Freak kits) freak does make stainless steel inserts (they are more expensive though).
I like the UL because you really dont need to worry about carrying a squeegee on the field. Three rounds will normally clear the barrel and then you can play on without worrying about ball curving down range.
Hope this helps
|
|
|
barrels
Oct 25, 2009 18:37:16 GMT -5
Post by leroyjenkins on Oct 25, 2009 18:37:16 GMT -5
i have been using a nightstick on my g3 since i purchased it...and love it...it is a good barrel forthe price
|
|
|
barrels
Oct 27, 2009 4:11:07 GMT -5
Post by Reverend Studley on Oct 27, 2009 4:11:07 GMT -5
I'll second that the night stick is good, I have one on my tm7 .the only thing that competes is a spec ops c series barrel.
|
|
|
barrels
Oct 27, 2009 11:36:09 GMT -5
Post by leroyjenkins on Oct 27, 2009 11:36:09 GMT -5
me allong with 5 otrs use this barrel on Social Hazard
|
|