|
|
Post by pedro on Mar 6, 2010 7:44:59 GMT -5
hey guys im about to invest in a dp g3 and just lookin for some tips on upgades and everything
|
|
|
|
Post by leroyjenkins on Mar 6, 2010 15:15:44 GMT -5
ok here we go.....
get rid of the grips because they are like bricks..i replaced mine with smartparts grips and havent had a problem with them
Dump the stock bolt and eother get the new or older tech t bolt i would suggest the new one because it is lighter
The stock reg sucks so your best best is to go with a CP shorty or long..whatever you prefer
I have a Invert niht stick on my g3 and it shoots money..never used my stock barrel so idk what to tell you about that.
Hopefully your o-ring doesnt go out in your asa like mine did because you cant find another o-ring for it..so i have a sp asa on mine only because it is lighter then a cp
PErsonely i do not care for the stock board because it does not have a activation poit because it have that laser that triggers it instead of a clickker whatever you call it
either get a cp rake trigger or sling..i prefer the rake because it doesnt have that retarded hump in the middle
And thats all the experience i can give you on the g3
|
|
|
|
Post by leroyjenkins on Mar 6, 2010 15:18:33 GMT -5
|
|
|
|
Post by pedro on Mar 6, 2010 17:16:19 GMT -5
alright thanks leroy that helps alot
|
|
|
|
Post by leroyjenkins on Mar 6, 2010 17:56:18 GMT -5
no prob anytime
|
|
|
|
Post by pedro on Mar 6, 2010 22:02:16 GMT -5
did u have problems with the solonoid cuz ive heard the solonoids suck until u get a replacement
|
|
|
|
Post by spade on Mar 7, 2010 9:48:23 GMT -5
So if your going to change out all those parts why not just buy a different gun?
|
|
|
|
Post by leroyjenkins on Mar 7, 2010 13:28:08 GMT -5
ya ....my noid went out after the first 3 weeks but the good thing about dp it you can buy a complete rebuild kit for like 30 bucks and i havent had a prolem snce with my noid...and because you cannot get another gun this light and it shoots money when you get all te upps on it
|
|
