|
Post by bobllongprotege08 on Mar 14, 2010 15:12:33 GMT -5
on the front of my auto cocker theres all those tubes and one of them keeps on popping off what can i do to fix it?
|
|
|
Post by levispoon on Mar 14, 2010 16:08:32 GMT -5
either your pressure is up or your hose is worn out... my bet your presssure is way up...
|
|
|
Post by leroyjenkins on Mar 14, 2010 21:36:24 GMT -5
this i directed towards you OXY!!!..lol
|
|
|
Post by Oxyfyde on Mar 15, 2010 11:46:24 GMT -5
either your pressure is up or your hose is worn out... my bet your presssure is way up... I concur, try lowering the LPR. If that doesn't work you might need some microline. Which can be a pain to install, little needle nose pliers would come in handy.
|
|
|
Post by fishmishin on Mar 15, 2010 11:57:18 GMT -5
If lowering your lpr pressure doesn't work and you have enough slack in your hoses you can trim the ends back to were you it won't be stretched out. That is only a temporary fix though, and it would be best to replace the hose anyway. I have some in stock and can have it shipped out to you tomorrow morning if needed.
|
|
|
Post by levispoon on Mar 15, 2010 16:09:01 GMT -5
if you need to change the hose put a drop of oil on the barb.. i worked for me....
|
|
|
Post by havoc on Mar 15, 2010 16:59:16 GMT -5
Boil water in a cup then dip the tip of the macroline in for about 5 seconds it will slip on the barb easily and stay put
|
|
|
Post by fishmishin on Mar 15, 2010 17:33:51 GMT -5
I have always just pushed then on w/o oil or heating them up or anything. Most of the new line you buy today is soft enough to go on w/o having to heat it or use oil. If thats what you need to do I don't see where it would hurt anything though.
|
|