|
|
Post by Rook on Apr 1, 2010 9:32:57 GMT -5
Anybody have any ideas as to why an 06 ego wont chrono over 220 fps?
|
|
|
|
Post by havoc on Apr 1, 2010 13:09:33 GMT -5
Reg rebuild needed or QEV valve(s) replacement -I dont think you can rebuild the QEV in the 06 model -they are the funky red ones. Does it leak?
|
|
|
|
Post by Hollywood on Apr 1, 2010 15:26:07 GMT -5
i just had to replace a noid in and 08 ego bc it wouldnt chrono over 200. rebuilt the reg and changed the diaphragms in the qev block and still wouldnt go up
|
|
Jory
High Dollar Walk On
Posts: 28
|
Post by Jory on Apr 1, 2010 20:27:45 GMT -5
1. make sure you have a good battery - energizer or duracell
2. change the number 9 and 11 o-rings on your rammer - even if they don't look bad
3. inspect your inline regulator. ensure the shims are all there 16 and installed correctly
)()()()()()()()(
4. inspect the o-ring on your reg piston - change and apply light dow33 to it
5. inspect the top of the reg piston there should be a black circle on top called a reg seat. if it is missiing, cracked or mis-shapen - replace the reg piston.
6. inspect the lpr - ensure it is assembled in proper order (5 parts to this one) and inspect the piston o-ring and change/grease if required.
those are the initial fixes.
are there any leaks?
also, if you have after market grips on it - check the rear solenoid assy for possible holes or cracks from the screws.
HAvoc is correct the 05/06 QEVs cannot be rebuilt - they just get replaced.
look into the steps I have listed first though.
Let me know if it works -
Jory
SSK
|
|
