Post by gamer5166 on May 30, 2011 0:09:12 GMT -5
Selling Tippman Carver One.
Shots Discharged: 500~
Session Status: 0 matches fought
O-Ring Status: Excellent.
Fire Rate: Semi Automatic (NO E-GRIP, apologies)
Comes with:
1x Visible Impact Hopper; holds 200 paintballs.
200x Visible impact paint-balls (non dimpled)
1x 20oz Visible impact c02 tank
1x Squeegee 14"
1x small pouch of provided Tippmann lube
Orings (already in the gun, still in excellent condition, (also the c02 oring, idk what to call it, apologies)
3x alen wrenches that properly fit the nuts + velocity pin/screw.
1x extra screw, used for butt stocks in the rear of the gun.
I bought this as an introduction to paintball but I only used the thing for about a month to try and adjust to the firing patterns. after that it's b een sitting around for 2 weeks after doing nothing. the gun itself is in Superb condition, only maintenance that probably needs to be done is to fix the velocity.
Side Note: The Carver One/ Tango One is compatible with all (i think) Tippmann 98 custom parts.
If interested, either respond to the post and i will try to get back to you asap or by responding to my email:
Gamer5166@comcast.net
Shots Discharged: 500~
Session Status: 0 matches fought
O-Ring Status: Excellent.
Fire Rate: Semi Automatic (NO E-GRIP, apologies)
Comes with:
1x Visible Impact Hopper; holds 200 paintballs.
200x Visible impact paint-balls (non dimpled)
1x 20oz Visible impact c02 tank
1x Squeegee 14"
1x small pouch of provided Tippmann lube
Orings (already in the gun, still in excellent condition, (also the c02 oring, idk what to call it, apologies)
3x alen wrenches that properly fit the nuts + velocity pin/screw.
1x extra screw, used for butt stocks in the rear of the gun.
I bought this as an introduction to paintball but I only used the thing for about a month to try and adjust to the firing patterns. after that it's b een sitting around for 2 weeks after doing nothing. the gun itself is in Superb condition, only maintenance that probably needs to be done is to fix the velocity.
Side Note: The Carver One/ Tango One is compatible with all (i think) Tippmann 98 custom parts.
If interested, either respond to the post and i will try to get back to you asap or by responding to my email:
Gamer5166@comcast.net